Firearm News
Links
Ordering Info.
Products
+ A-Zoom Ammo
+ Books & Manuals
+ Command Arms
+ Fobus Holsters
+ Gun Care
+ Knives
+ Lyman
+ Magazines
+ Misc./Surplus
+ Optics
+ Pachmayr
+ TacStar
[Click the above logo to visit Command Arms Accessories]
Please E-mail us with your specific needs!
E-mail us for discounted shipping costs!
Click to enlarge
AR-15 Accuwedge
Accuwedges are one of those essential and important parts of an AR-15 and they do not come installed when you purchase the weapon. This part adds tightness too the weapon and eliminates any unwanted noises. Installation takes a minute and it fits between the receiver and the trigger assembly housing and completely eliminates the play. It fits easily into the slot just below the assembly pin and ensures a very snug reassembly.
(These are not manufactured by Command Arms Accessories!)
Call for current price
Click to enlarge
AR-15 Magazine Springs "Next Generation"
These replacement springs are made of chrome silicon wire and that is because it has 1000 times the memory of music wire or 17-7 stainless that is mostly used in your magazines. This means that you won't experience the problem that you see with most springs, and that is that after continuous use they loss their ability to function properly which results in feeding problems.
You can load a magazine with one of these springs and have reliable feeding for 20 years! Lastly, all these springs have a Parkerized coat of; zinc Phosphate-this will provide over 72 hours of corrosion protection in a salt spray environment.
Don't ever have to download you magazines ever again.
(These are not manufactured by Command Arms Accessories!)
Call for current price
Click to enlarge
AR-15 Magazine "Green Followers"
This brand new part will provide you with years of trouble free service. AR-15 Green magazine follower, Mil-Spec. replaces the old black follower to solve your feeding problems. Currently used on all new military contracts. Will not fit the new permanently fixed/blocked 5 & 10 round mags. Will fit the new 7 round and old 30 round mags.
(These are not manufactured by Command Arms Accessories!)
Call for current price
Quantity Discount Available!
Click to enlarge
AR15/M16 223 Magazine Coupler
Joins two magazines for the .223 M16/AR15 for greater ammunition capacity, saving crucial reload seconds. It holds magazines with rock solid strength and will not scratch or deform your magazines. These are Issued and Battle tested by Israeli Military. These can be used in parallel and staggered positions. Lightweight and Fiberglass reinforced, lifetime warranty.
Call for current price
Quantity and Law Enforcement Discount Available!
Click to enlarge
AK-47 30 Round Magazine Couplers
Joins two 30 round magazines for the AK47 for greater ammunition capacity, saving crucial reload seconds. It holds magazines with rock solid strength and will not scratch or deform your magazines. Manufactured by Fobus, these are the same type used by the Special Units of the Israeli Defense Forces (IDF). These have also been Battle tested by Israeli Military. These can be used in parallel and staggered positions. Lightweight and Fiberglass reinforced, lifetime warranty.
Call for current price
Quantity and Law Enforcement Discount Available!
Click to enlarge
BP1-Harris Bi-Pod Adaptor for the Picatinny Rail System
This will mount right onto the new Fobus M-33 Hand Guard.
Call for current price
Click to enlarge
Flashlight Holder
Scorpion or Surefire flashlights will Mount on all Picatinny and Weaver Rail Systems.
Assists the operator to identify threats in low-light conditions or darkness. Permits operator to hold the weapon with two hands while still having ready access to an illumination source. Available in two styles for SureFire (FAS #2)and Streamlight & Scorpion (FAS #3) flashlights, but will accommodate other lights of similar barrel dimensions.
Push button mounting and adjustment.
Call for current price
Click to enlarge
G-27 Tactical M16/AR15 Grip
This new TACTICAL PISTOL GRIP is sure to increase the performance of your rifle or carbine. Made from our own proven synthetic materials, it incorporates finger swelts and a backstrap that is designed with surfacing to enhance your grip and minimize the chance of slippage should the grip become wet. The integral extended beavertail provides better control during firing sequences as it allows a higher and firmer hold on the G-27, while protecting the web of your hand. Also, the supplied insert securely seals the uniquely designed bottom of the Tactical Pistol Grip to allow a readily accessible storage area. The tactical G-27 is designed to be ambidextrous and installs quickly. The G-27 Grip Carries our Lifetime Replacement Guarantee!
Call for current price
Click to enlarge
M-33 Hand Guard
With decades of experience designing homeland defense products for the Israeli Military, our Company is pleased to offer the following: In today's world, Command Arms Accessories products (Fobus Holsters) have become very important to Civilian , Law Enforcement , and Military groups all over the World. Our recent focus has been on the development of an innovative mounting system for the M-16/AR15 along with popular accessories to compliment the M-33 hand guard.
Built to military specification, the M-33 will fit all M-16/AR15 style carbine rifles. Produced from special high density polymers injected into ultra precision molds, with rails molded directly into the hand guards top and bottom halves. The rails will accept any accessory with a Picatinny or Weaver base. The design of the rails are such that the user will not notice any additional bulk or weight added to the hand guards. Lasers, lights, optics, bi-pods, and other mission specific accessories can be easily mounted on the rails. A sliding cover is provided to protect the rails when not in use and enhance the operator's grip upon the hand guards. The use of a stainless steel heat shield within the M-33 hand guard acts as a heat sink to dissipate the high temperatures encountered during sustained rapid fire sequences. A family of accessories has been designed that are combat proven, rugged, lightweight, affordable and easy to install and use. Impervious to hot or cold conditions, no gunsmithing or special fitting is required with these accessories. All Command Arms Accessories products carry a lifetime warranty.
Call for current price
Click to enlarge
M44 Hand Guard for Carbine or Full-Sized Rifle
Built to military specifications for the M16/AR15. The M44 allows the mounting of any accessory with a Picatinny or Weaver® base, including lasers, lights, optics and bi-pods. The operator will not notice additional bulk or weight as the rails are designed to be an integral part of the hand guard. Thermal rubber rail covers enhance the operator’s grip and protect the rails when not in use. A metal heat shield dissipates the high temperatures produced during sustained rapid fire sequences. Available in rifle and carbine lengths. No tools or gunsmithing required for installation. Covered by a lifetime warranty.
Call for current price
Click to enlarge
VGI-Vertical Grip Picatinny Rail M-16
Vertical Grip to be mounted on Picatinny Rail M-33 Hand Guard. This was developed to fit handguards equipped with a Weaver or Picatinny rail system. "Use of the Vertical Grip will allow a natural "fighting stance" hold on your rifle. This allows you to position your hands with one one the Pistol Grip and the other on The Vertical Grip, allowing for improvement in both the reaction time needed to get "on target" and muzzle control during rapid fire will be noticed. The Vertical Grip may be positioned, and held firmly, on the rail by simply pressing the lock button and sliding to the intended location and then releasing. No tools or gunsmithing required.
Call for current price
Click to enlarge
|
Lippman Enterprises, Ltd. P.O. Box 134 Palenville, N.Y. 12463 E-mail: lippy@lippman-enterprises.com Phone: 518-678-3519 Fax: 518-678-0049 |
|
American Express! 
 |
|